balsoft/ligo
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
197b29b040
ligo/docs/whitedoc/michelson.rst
Benjamin Canou 197b29b040 Michelson: add PACK and UNPACK
2018-06-22 14:18:08 +00:00

3008 lines
85 KiB
ReStructuredText
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

.. _michelson:
Michelson: the language of Smart Contracts in Tezos
===================================================
The language is stack based, with high level data types and primitives
and strict static type checking. Its design cherry picks traits from
several language families. Vigilant readers will notice direct
references to Forth, Scheme, ML and Cat.
A Michelson program is a series of instructions that are run in
sequence: each instruction receives as input the stack resulting of the
previous instruction, and rewrites it for the next one. The stack
contains both immediate values and heap allocated structures. All values
are immutable and garbage collected.
A Michelson program receives as input a single element stack containing
an input value and the contents of a storage space. It must return a
single element stack containing aa output value a list of internal
operations, and the new contents of the storage space. Alternatively,
a Michelson program can fail, explicitly using a specific opcode,
or because something went wrong that could not be caught by the type
system (e.g. division by zero, gas exhaustion).
The types of the input, output and storage are fixed and monomorphic,
and the program is typechecked before being introduced into the system.
No smart contract execution can fail because an instruction has been
executed on a stack of unexpected length or contents.
This specification gives the complete instruction set, type system and
semantics of the language. It is meant as a precise reference manual,
not an easy introduction. Even though, some examples are provided at the
end of the document and can be read first or at the same time as the
specification.
Table of contents
-----------------
- I - Semantics
- II - Type system
- III - Core data types
- IV - Core instructions
- V - Operations
- VI - Domain specific data types
- VII - Domain specific operations
- VIII - Macros
- IX - Concrete syntax
- X - JSON syntax
- XI - Examples
- XII - Full grammar
- XIII - Reference implementation
I - Semantics
-------------
This specification gives a detailed formal semantics of the Michelson
language. It explains in a symbolic way the computation performed by the
Michelson interpreter on a given program and initial stack to produce
the corresponding resulting stack. The Michelson interpreter is a pure
function: it only builds a result stack from the elements of an initial
one, without affecting its environment. This semantics is then naturally
given in what is called a big step form: a symbolic definition of a
recursive reference interpreter. This definition takes the form of a
list of rules that cover all the possible inputs of the interpreter
(program and stack), and describe the computation of the corresponding
resulting stacks.
Rules form and selection
~~~~~~~~~~~~~~~~~~~~~~~~
The rules have the main following form.
::
> (syntax pattern) / (initial stack pattern) => (result stack pattern)
iff (conditions)
where (recursions)
and (more recursions)
The left hand side of the ``=>`` sign is used for selecting the rule.
Given a program and an initial stack, one (and only one) rule can be
selected using the following process. First, the toplevel structure of
the program must match the syntax pattern. This is quite simple since
there is only a few non trivial patterns to deal with instruction
sequences, and the rest is made of trivial pattern that match one
specific instruction. Then, the initial stack must match the initial
stack pattern. Finally, some rules add extra conditions over the values
in the stack that follow the ``iff`` keyword. Sometimes, several rules
may apply in a given context. In this case, the one that appears first
in this specification is to be selected. If no rule applies, the result
is equivalent to the one for the explicit ``FAILWITH`` instruction. This
case does not happen on well-typed programs, as explained in the next
section.
The right hand side describes the result of the interpreter if the rule
applies. It consists in a stack pattern, whose part are either
constants, or elements of the context (program and initial stack) that
have been named on the left hand side of the ``=>`` sign.
Recursive rules (big step form)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, the result of interpreting a program is derived from the
result of interpreting another one (as in conditionals or function
calls). In these cases, the rule contains a clause of the following
form.
::
where (intermediate program) / (intermediate stack) => (partial result)
This means that this rules applies in case interpreting the intermediate
state on the left gives the pattern on the right.
The left hand sign of the ``=>`` sign is constructed from elements of
the initial state or other partial results, and the right hand side
identify parts that can be used to build the result stack of the rule.
If the partial result pattern does not actually match the result of the
interpretation, then the result of the whole rule is equivalent to the
one for the explicit ``FAILWITH`` instruction. Again, this case does not
happen on well-typed programs, as explained in the next section.
Format of patterns
~~~~~~~~~~~~~~~~~~
Code patterns are of one of the following syntactical forms.
- ``INSTR`` (an uppercase identifier) is a simple instruction (e.g.
``DROP``);
- ``INSTR (arg) ...`` is a compound instruction, whose arguments can be
code, data or type patterns (e.g. ``PUSH nat 3``) ;
- ``{ (instr) ; ... }`` is a possibly empty sequence of instructions,
(e.g. ``IF { SWAP ; DROP } { DROP }``), nested sequences can drop the
braces ;
- ``name`` is a pattern that matches any program and names a part of
the matched program that can be used to build the result ;
- ``_`` is a pattern that matches any instruction.
Stack patterns are of one of the following syntactical forms.
- ``[FAILED]`` is the special failed state ;
- ``[]`` is the empty stack ;
- ``(top) : (rest)`` is a stack whose top element is matched by the
data pattern ``(top)`` on the left, and whose remaining elements are
matched by the stack pattern ``(rest)`` on the right (e.g.
``x : y : rest``) ;
- ``name`` is a pattern that matches any stack and names it in order to
use it to build the result ;
- ``_`` is a pattern that matches any stack.
Data patterns are of one of the following syntactical forms.
- integer/natural number literals, (e.g. ``3``) ;
- string literals, (e.g. ``"contents"``) ;
- raw byte sequence literals (e.g. ``0xABCDEF42``)
- ``Tag`` (capitalized) is a symbolic constant, (e.g. ``Unit``,
``True``, ``False``) ;
- ``(Tag (arg) ...)`` tagged constructed data, (e.g. ``(Pair 3 4)``) ;
- a code pattern for first class code values ;
- ``name`` to name a value in order to use it to build the result ;
- ``_`` to match any value.
The domain of instruction names, symbolic constants and data
constructors is fixed by this specification. Michelson does not let the
programmer introduce its own types.
Be aware that the syntax used in the specification may differ a bit from
the concrete syntax, which is presented in Section IX. In particular,
some instructions are annotated with types that are not present in the
concrete language because they are synthesized by the typechecker.
Shortcuts
~~~~~~~~~
Sometimes, it is easier to think (and shorter to write) in terms of
program rewriting than in terms of big step semantics. When it is the
case, and when both are equivalents, we write rules of the form:
::
p / S => S''
where p' / S' => S''
using the following shortcut:
::
p / S => p' / S'
The concrete language also has some syntax sugar to group some common
sequences of operations as one. This is described in this specification
using a simple regular expression style recursive instruction rewriting.
II - Introduction to the type system and notations
--------------------------------------------------
This specification describes a type system for Michelson. To make things
clear, in particular to readers that are not accustomed to reading
formal programming language specifications, it does not give a
typechecking or inference algorithm. It only gives an intentional
definition of what we consider to be well-typed programs. For each
syntactical form, it describes the stacks that are considered well-typed
inputs, and the resulting outputs.
The type system is sound, meaning that if a program can be given a type,
then if run on a well-typed input stack, the interpreter will never
apply an interpretation rule on a stack of unexpected length or
contents. Also, it will never reach a state where it cannot select an
appropriate rule to continue the execution. Well-typed programs do not
block, and do not go wrong.
Type notations
~~~~~~~~~~~~~~
The specification introduces notations for the types of values, terms
and stacks. Apart from a subset of value types that appear in the form
of type annotations in some places throughout the language, it is
important to understand that this type language only exists in the
specification.
A stack type can be written:
- ``[]`` for the empty stack ;
- ``(top) : (rest)`` for the stack whose first value has type ``(top)``
and queue has stack type ``(rest)``.
Instructions, programs and primitives of the language are also typed,
their types are written:
::
(type of stack before) -> (type of stack after)
The types of values in the stack are written:
- ``identifier`` for a primitive data-type (e.g. ``bool``),
- ``identifier (arg)`` for a parametric data-type with one parameter
type ``(arg)`` (e.g. ``list nat``),
- ``identifier (arg) ...`` for a parametric data-type with several
parameters (e.g. ``map string int``),
- ``[ (type of stack before) -> (type of stack after) ]`` for a code
quotation, (e.g. ``[ int : int : [] -> int : [] ]``),
- ``lambda (arg) (ret)`` is a shortcut for
``[ (arg) : [] -> (ret) : [] ]``.
Meta type variables
~~~~~~~~~~~~~~~~~~~
The typing rules introduce meta type variables. To be clear, this has
nothing to do with polymorphism, which Michelson does not have. These
variables only live at the specification level, and are used to express
the consistency between the parts of the program. For instance, the
typing rule for the ``IF`` construct introduces meta variables to
express that both branches must have the same type.
Here are the notations for meta type variables:
- ``'a`` for a type variable,
- ``'A`` for a stack type variable,
- ``_`` for an anonymous type or stack type variable.
Typing rules
~~~~~~~~~~~~
The system is syntax directed, which means here that it defines a single
typing rule for each syntax construct. A typing rule restricts the type
of input stacks that are authorized for this syntax construct, links the
output type to the input type, and links both of them to the
subexpressions when needed, using meta type variables.
Typing rules are of the form:
::
(syntax pattern)
:: (type of stack before) -> (type of stack after) [rule-name]
iff (premises)
Where premises are typing requirements over subprograms or values in the
stack, both of the form ``(x) :: (type)``, meaning that value ``(x)``
must have type ``(type)``.
A program is shown well-typed if one can find an instance of a rule that
applies to the toplevel program expression, with all meta type variables
replaced by non variable type expressions, and of which all type
requirements in the premises can be proven well-typed in the same
manner. For the reader unfamiliar with formal type systems, this is
called building a typing derivation.
Here is an example typing derivation on a small program that computes
``(x+5)*10`` for a given input ``x``, obtained by instantiating the
typing rules for instructions ``PUSH``, ``ADD`` and for the sequence, as
found in the next sections. When instantiating, we replace the ``iff``
with ``by``.
::
{ PUSH nat 5 ; ADD ; PUSH nat 10 ; SWAP ; MUL }
:: [ nat : [] -> nat : [] ]
by { PUSH nat 5 ; ADD }
:: [ nat : [] -> nat : [] ]
by PUSH nat 5
:: [ nat : [] -> nat : nat : [] ]
by 5 :: nat
and ADD
:: [ nat : nat : [] -> nat : [] ]
and { PUSH nat 10 ; SWAP ; MUL }
:: [ nat : [] -> nat : [] ]
by PUSH nat 10
:: [ nat : [] -> nat : nat : [] ]
by 10 :: nat
and { SWAP ; MUL }
:: [ nat : nat : [] -> nat : [] ]
by SWAP
:: [ nat : nat : [] -> nat : nat : [] ]
and MUL
:: [ nat : nat : [] -> nat : [] ]
Producing such a typing derivation can be done in a number of manners,
such as unification or abstract interpretation. In the implementation of
Michelson, this is done by performing a recursive symbolic evaluation of
the program on an abstract stack representing the input type provided by
the programmer, and checking that the resulting symbolic stack is
consistent with the expected result, also provided by the programmer.
Side note
~~~~~~~~~
As with most type systems, it is incomplete. There are programs that
cannot be given a type in this type system, yet that would not go wrong
if executed. This is a necessary compromise to make the type system
usable. Also, it is important to remember that the implementation of
Michelson does not accept as many programs as the type system describes
as well-typed. This is because the implementation uses a simple single
pass typechecking algorithm, and does not handle any form of
polymorphism.
III - Core data types and notations
-----------------------------------
- ``string``, ``nat``, ``int`` and ``bytes``: The core primitive
constant types.
- ``bool``: The type for booleans whose values are ``True`` and
``False``
- ``unit``: The type whose only value is ``Unit``, to use as a
placeholder when some result or parameter is non necessary. For
instance, when the only goal of a contract is to update its storage.
- ``list (t)``: A single, immutable, homogeneous linked list, whose
elements are of type ``(t)``, and that we note ``{}`` for the empty
list or ``{ first ; ... }``. In the semantics, we use chevrons to
denote a subsequence of elements. For instance ``{ head ; <tail> }``.
- ``pair (l) (r)``: A pair of values ``a`` and ``b`` of types ``(l)``
and ``(r)``, that we write ``(Pair a b)``.
- ``option (t)``: Optional value of type ``(t)`` that we note ``None``
or ``(Some v)``.
- ``or (l) (r)``: A union of two types: a value holding either a value
``a`` of type ``(l)`` or a value ``b`` of type ``(r)``, that we write
``(Left a)`` or ``(Right b)``.
- ``set (t)``: Immutable sets of values of type ``(t)`` that we note as
lists ``{ item ; ... }``, of course with their elements unique, and
sorted.
- ``map (k) (t)``: Immutable maps from keys of type ``(k)`` of values
of type ``(t)`` that we note ``{ Elt key value ; ... }``, with keys
sorted.
- ``big_map (k) (t)``: Lazily deserialized maps from keys of type
``(k)`` of values of type ``(t)`` that we note ``{ Elt key value ; ... }``,
with keys sorted. These maps should be used if you intend to store
large amounts of data in a map. They have higher gas costs than
standard maps as data is lazily deserialized. You are limited to a
single ``big_map`` per program, which must appear on the left hand
side of a pair in the contract's storage.
IV - Core instructions
----------------------
Control structures
~~~~~~~~~~~~~~~~~~
- ``FAILWITH``: Explicitly abort the current program.
'a :: \_ -> \_
This special instruction aborts the current program exposing the top
of the stack in its error message (first rule below). It makes the
output useless since all subsequent instructions will simply ignore
their usual semantics to propagate the failure up to the main result
(second rule below). Its type is thus completely generic.
::
> FAILWITH / a : _ => [FAILED]
> _ / [FAILED] => [FAILED]
- ``{ I ; C }``: Sequence.
::
:: 'A -> 'C
iff I :: [ 'A -> 'B ]
C :: [ 'B -> 'C ]
> I ; C / SA => SC
where I / SA => SB
and C / SB => SC
- ``IF bt bf``: Conditional branching.
::
:: bool : 'A -> 'B
iff bt :: [ 'A -> 'B ]
bf :: [ 'A -> 'B ]
> IF bt bf / True : S => bt / S
> IF bt bf / False : S => bf / S
- ``LOOP body``: A generic loop.
::
:: bool : 'A -> 'A
iff body :: [ 'A -> bool : 'A ]
> LOOP body / True : S => body ; LOOP body / S
> LOOP body / False : S => S
- ``LOOP_LEFT body``: A loop with an accumulator
::
:: (or 'a 'b) : 'A -> 'b : 'A
iff body :: [ 'a : 'A -> (or 'a 'b) : 'A ]
> LOOP_LEFT body / (Left a) : S => body ; LOOP_LEFT body / a : S
> LOOP_LEFT body / (Right b) : S => b : S
- ``DIP code``: Runs code protecting the top of the stack.
::
:: 'b : 'A -> 'b : 'C
iff code :: [ 'A -> 'C ]
> DIP code / x : S => x : S'
where code / S => S'
- ``EXEC``: Execute a function from the stack.
::
:: 'a : lambda 'a 'b : 'C -> 'b : 'C
> EXEC / a : f : S => r : S
where f / a : [] => r : []
Stack operations
~~~~~~~~~~~~~~~~
- ``DROP``: Drop the top element of the stack.
::
:: _ : 'A -> 'A
> DROP / _ : S => S
- ``DUP``: Duplicate the top of the stack.
::
:: 'a : 'A -> 'a : 'a : 'A
> DUP / x : S => x : x : S
- ``SWAP``: Exchange the top two elements of the stack.
::
:: 'a : 'b : 'A -> 'b : 'a : 'A
> SWAP / x : y : S => y : x : S
- ``PUSH 'a x``: Push a constant value of a given type onto the stack.
::
:: 'A -> 'a : 'A
iff x :: 'a
> PUSH 'a x / S => x : S
- ``UNIT``: Push a unit value onto the stack.
::
:: 'A -> unit : 'A
> UNIT / S => Unit : S
- ``LAMBDA 'a 'b code``: Push a lambda with given parameter and return
types onto the stack.
::
:: 'A -> (lambda 'a 'b) : 'A
> LAMBDA _ _ code / S => code : S
Generic comparison
~~~~~~~~~~~~~~~~~~
Comparison only works on a class of types that we call comparable. A
``COMPARE`` operation is defined in an ad hoc way for each comparable
type, but the result of compare is always an ``int``, which can in turn
be checked in a generic manner using the following combinators. The
result of ``COMPARE`` is ``0`` if the top two elements of the stack are
equal, negative if the first element in the stack is less than the
second, and positive otherwise.
- ``EQ``: Checks that the top of the stack EQuals zero.
::
:: int : 'S -> bool : 'S
> EQ / 0 : S => True : S
> EQ / v : S => False : S
iff v <> 0
- ``NEQ``: Checks that the top of the stack does Not EQual zero.
::
:: int : 'S -> bool : 'S
> NEQ / 0 : S => False : S
> NEQ / v : S => True : S
iff v <> 0
- ``LT``: Checks that the top of the stack is Less Than zero.
::
:: int : 'S -> bool : 'S
> LT / v : S => True : S
iff v < 0
> LT / v : S => False : S
iff v >= 0
- ``GT``: Checks that the top of the stack is Greater Than zero.
::
:: int : 'S -> bool : 'S
> GT / v : S => C / True : S
iff v > 0
> GT / v : S => C / False : S
iff v <= 0
- ``LE``: Checks that the top of the stack is Less Than of Equal to
zero.
::
:: int : 'S -> bool : 'S
> LE / v : S => True : S
iff v <= 0
> LE / v : S => False : S
iff v > 0
- ``GE``: Checks that the top of the stack is Greater Than of Equal to
zero.
::
:: int : 'S -> bool : 'S
> GE / v : S => True : S
iff v >= 0
> GE / v : S => False : S
iff v < 0
V - Operations
--------------
Operations on booleans
~~~~~~~~~~~~~~~~~~~~~~
- ``OR``
::
:: bool : bool : 'S -> bool : 'S
> OR / x : y : S => (x | y) : S
- ``AND``
::
:: bool : bool : 'S -> bool : 'S
> AND / x : y : S => (x & y) : S
- ``XOR``
::
:: bool : bool : 'S -> bool : 'S
> XOR / x : y : S => (x ^ y) : S
- ``NOT``
::
:: bool : 'S -> bool : 'S
> NOT / x : S => ~x : S
Operations on integers and natural numbers
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Integers and naturals are arbitrary-precision, meaning the only size
limit is fuel.
- ``NEG``
::
:: int : 'S -> int : 'S
:: nat : 'S -> int : 'S
> NEG / x : S => -x : S
- ``ABS``
::
:: int : 'S -> nat : 'S
> ABS / x : S => abs (x) : S
- ``ADD``
::
:: int : int : 'S -> int : 'S
:: int : nat : 'S -> int : 'S
:: nat : int : 'S -> int : 'S
:: nat : nat : 'S -> nat : 'S
> ADD / x : y : S => (x + y) : S
- ``SUB``
::
:: int : int : 'S -> int : 'S
:: int : nat : 'S -> int : 'S
:: nat : int : 'S -> int : 'S
:: nat : nat : 'S -> int : 'S
> SUB / x : y : S => (x - y) : S
- ``MUL``
::
:: int : int : 'S -> int : 'S
:: int : nat : 'S -> int : 'S
:: nat : int : 'S -> int : 'S
:: nat : nat : 'S -> nat : 'S
> MUL / x : y : S => (x * y) : S
- ``EDIV`` Perform Euclidian division
::
:: int : int : 'S -> option (pair int nat) : 'S
:: int : nat : 'S -> option (pair int nat) : 'S
:: nat : int : 'S -> option (pair int nat) : 'S
:: nat : nat : 'S -> option (pair nat nat) : 'S
> EDIV / x : 0 : S => None : S
> EDIV / x : y : S => Some (Pair (x / y) (x % y)) : S
iff y <> 0
Bitwise logical operators are also available on unsigned integers.
- ``OR``
::
:: nat : nat : 'S -> nat : 'S
> OR / x : y : S => (x | y) : S
- ``AND`` (also available when the top operand is signed)
::
:: nat : nat : 'S -> nat : 'S
:: int : nat : 'S -> nat : 'S
> AND / x : y : S => (x & y) : S
- ``XOR``
::
:: nat : nat : 'S -> nat : 'S
> XOR / x : y : S => (x ^ y) : S
- ``NOT`` The return type of ``NOT`` is an ``int`` and not a ``nat``.
This is because the sign is also negated. The resulting integer is
computed using two's complement. For instance, the boolean negation
of ``0`` is ``-1``. To get a natural back, a possibility is to use
``AND`` with an unsigned mask afterwards.
::
:: nat : 'S -> int : 'S
:: int : 'S -> int : 'S
> NOT / x : S => ~x : S
- ``LSL``
::
:: nat : nat : 'S -> nat : 'S
> LSL / x : s : S => (x << s) : S
iff s <= 256
> LSL / x : s : S => [FAILED]
iff s > 256
- ``LSR``
::
:: nat : nat : 'S -> nat : 'S
> LSR / x : s : S => (x >>> s) : S
- ``COMPARE``: Integer/natural comparison
::
:: int : int : 'S -> int : 'S
:: nat : nat : 'S -> int : 'S
> COMPARE / x : y : S => -1 : S
iff x < y
> COMPARE / x : y : S => 0 : S
iff x = y
> COMPARE / x : y : S => 1 : S
iff x > y
Operations on strings
~~~~~~~~~~~~~~~~~~~~~
Strings are mostly used for naming things without having to rely on
external ID databases. So what can be done is basically use string
constants as is, concatenate them and use them as keys.
- ``CONCAT``: String concatenation.
::
:: string : string : 'S -> string : 'S
> CONCAT / s : t : S => (s ^ t) : S
- ``COMPARE``: Lexicographic comparison.
::
:: string : string : 'S -> int : 'S
> COMPARE / s : t : S => -1 : S
iff s < t
> COMPARE / s : t : S => 0 : S
iff s = t
> COMPARE / s : t : S => 1 : S
iff s > t
Operations on pairs
~~~~~~~~~~~~~~~~~~~
- ``PAIR``: Build a pair from the stack's top two elements.
::
:: 'a : 'b : 'S -> pair 'a 'b : 'S
> PAIR / a : b : S => (Pair a b) : S
- ``CAR``: Access the left part of a pair.
::
:: pair 'a _ : 'S -> 'a : 'S
> CAR / (Pair a _) : S => a : S
- ``CDR``: Access the right part of a pair.
::
:: pair _ 'b : 'S -> 'b : 'S
> CDR / (Pair _ b) : S => b : S
Operations on sets
~~~~~~~~~~~~~~~~~~
- ``EMPTY_SET 'elt``: Build a new, empty set for elements of a given
type.
The ``'elt`` type must be comparable (the ``COMPARE``
primitive must be defined over it).
::
:: 'S -> set 'elt : 'S
> EMPTY_SET _ / S => {} : S
- ``MEM``: Check for the presence of an element in a set.
::
:: 'elt : set 'elt : 'S -> bool : 'S
> MEM / x : {} : S => false : S
> MEM / x : { hd ; <tl> } : S => r : S
iff COMPARE / x : hd : [] => 1 : []
where MEM / x : v : { <tl> } : S => r : S
> MEM / x : { hd ; <tl> } : S => true : S
iff COMPARE / x : hd : [] => 0 : []
> MEM / x : { hd ; <tl> } : S => false : S
iff COMPARE / x : hd : [] => -1 : []
- ``UPDATE``: Inserts or removes an element in a set, replacing a
previous value.
::
:: 'elt : bool : set 'elt : 'S -> set 'elt : 'S
> UPDATE / x : false : {} : S => {} : S
> UPDATE / x : true : {} : S => { x } : S
> UPDATE / x : v : { hd ; <tl> } : S => { hd ; <tl'> } : S
iff COMPARE / x : hd : [] => 1 : []
where UPDATE / x : v : { <tl> } : S => { <tl'> } : S
> UPDATE / x : false : { hd ; <tl> } : S => { <tl> } : S
iff COMPARE / x : hd : [] => 0 : []
> UPDATE / x : true : { hd ; <tl> } : S => { hd ; <tl> } : S
iff COMPARE / x : hd : [] => 0 : []
> UPDATE / x : false : { hd ; <tl> } : S => { hd ; <tl> } : S
iff COMPARE / x : hd : [] => -1 : []
> UPDATE / x : true : { hd ; <tl> } : S => { x ; hd ; <tl> } : S
iff COMPARE / x : hd : [] => -1 : []
- ``ITER body``: Apply the body expression to each element of a set.
The body sequence has access to the stack.
::
:: (set 'elt) : 'A -> 'A
iff body :: [ 'elt : 'A -> 'A ]
> ITER body / {} : S => S
> ITER body / { hd ; <tl> } : S => body; ITER body / hd : { <tl> } : S
- ``SIZE``: Get the cardinality of the set.
::
:: set 'elt : 'S -> nat : 'S
> SIZE / {} : S => 0 : S
> SIZE / { _ ; <tl> } : S => 1 + s : S
where SIZE / { <tl> } : S => s : S
Operations on maps
~~~~~~~~~~~~~~~~~~
- ``EMPTY_MAP 'key 'val``: Build a new, empty map from keys of a
given type to values of another given type.
The ``'key`` type must be comparable (the ``COMPARE`` primitive must
be defined over it).
::
:: 'S -> map 'key 'val : 'S
> EMPTY_MAP _ _ / S => {} : S
- ``GET``: Access an element in a map, returns an optional value to be
checked with ``IF_SOME``.
::
:: 'key : map 'key 'val : 'S -> option 'val : 'S
> GET / x : {} : S => None : S
> GET / x : { Elt k v ; <tl> } : S => opt_y : S
iff COMPARE / x : k : [] => 1 : []
where GET / x : { <tl> } : S => opt_y : S
> GET / x : { Elt k v ; <tl> } : S => Some v : S
iff COMPARE / x : k : [] => 0 : []
> GET / x : { Elt k v ; <tl> } : S => None : S
iff COMPARE / x : k : [] => -1 : []
- ``MEM``: Check for the presence of a binding for a key in a map.
::
:: 'key : map 'key 'val : 'S -> bool : 'S
> MEM / x : {} : S => false : S
> MEM / x : { Elt k v ; <tl> } : S => r : S
iff COMPARE / x : k : [] => 1 : []
where MEM / x : { <tl> } : S => r : S
> MEM / x : { Elt k v ; <tl> } : S => true : S
iff COMPARE / x : k : [] => 0 : []
> MEM / x : { Elt k v ; <tl> } : S => false : S
iff COMPARE / x : k : [] => -1 : []
- ``UPDATE``: Assign or remove an element in a map.
::
:: 'key : option 'val : map 'key 'val : 'S -> map 'key 'val : 'S
> UPDATE / x : None : {} : S => {} : S
> UPDATE / x : Some y : {} : S => { Elt x y } : S
> UPDATE / x : opt_y : { Elt k v ; <tl> } : S => { Elt k v ; <tl'> } : S
iff COMPARE / x : k : [] => 1 : []
where UPDATE / x : opt_y : { <tl> } : S => { <tl'> } : S
> UPDATE / x : None : { Elt k v ; <tl> } : S => { <tl> } : S
iff COMPARE / x : k : [] => 0 : []
> UPDATE / x : Some y : { Elt k v ; <tl> } : S => { Elt k y ; <tl> } : S
iff COMPARE / x : k : [] => 0 : []
> UPDATE / x : None : { Elt k v ; <tl> } : S => { Elt k v ; <tl> } : S
iff COMPARE / x : k : [] => -1 : []
> UPDATE / x : Some y : { Elt k v ; <tl> } : S => { Elt x y ; Elt k v ; <tl> } : S
iff COMPARE / x : k : [] => -1 : []
- ``MAP body``: Apply the body expression to each element of a map. The
body sequence has access to the stack.
::
:: (map 'key 'val) : 'A -> (map 'key 'b) : 'A
iff body :: [ (pair 'key 'val) : 'A -> 'b : 'A ]
> MAP body / {} : S => {} : S
> MAP body / { Elt k v ; <tl> } : S => { Elt k (body (Pair k v)) ; <tl'> } : S
where MAP body / { <tl> } : S => { <tl'> } : S
- ``ITER body``: Apply the body expression to each element of a map.
The body sequence has access to the stack.
::
:: (map 'elt 'val) : 'A -> 'A
iff body :: [ (pair 'elt 'val) : 'A -> 'A ]
> ITER body / {} : S => S
> ITER body / { Elt k v ; <tl> } : S => body ; ITER body / (Pair k v) : { <tl> } : S
- ``SIZE``: Get the cardinality of the map.
::
:: map 'key 'val : 'S -> nat : 'S
> SIZE / {} : S => 0 : S
> SIZE / { _ ; <tl> } : S => 1 + s : S
where SIZE / { <tl> } : S => s : S
Operations on ``big_maps``
~~~~~~~~~~~~~~~~~~~~~~~~~~
The behavior of these operations is the same as if they were normal
maps, except that under the hood, the elements are loaded and
deserialized on demand.
- ``GET``: Access an element in a ``big_map``, returns an optional value to be
checked with ``IF_SOME``.
::
:: 'key : big_map 'key 'val : 'S -> option 'val : 'S
- ``MEM``: Check for the presence of an element in a ``big_map``.
::
:: 'key : big_map 'key 'val : 'S -> bool : 'S
- ``UPDATE``: Assign or remove an element in a ``big_map``.
::
:: 'key : option 'val : big_map 'key 'val : 'S -> big_map 'key 'val : 'S
Operations on optional values
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- ``SOME``: Pack a present optional value.
::
:: 'a : 'S -> option 'a : 'S
> SOME / v : S => (Some v) : S
- ``NONE 'a``: The absent optional value.
::
:: 'S -> option 'a : 'S
> NONE / v : S => None : S
- ``IF_NONE bt bf``: Inspect an optional value.
::
:: option 'a : 'S -> 'b : 'S
iff bt :: [ 'S -> 'b : 'S]
bf :: [ 'a : 'S -> 'b : 'S]
> IF_NONE bt bf / (None) : S => bt / S
> IF_NONE bt bf / (Some a) : S => bf / a : S
Operations on unions
~~~~~~~~~~~~~~~~~~~~
- ``LEFT 'b``: Pack a value in a union (left case).
::
:: 'a : 'S -> or 'a 'b : 'S
> LEFT / v : S => (Left v) : S
- ``RIGHT 'a``: Pack a value in a union (right case).
::
:: 'b : 'S -> or 'a 'b : 'S
> RIGHT / v : S => (Right v) : S
- ``IF_LEFT bt bf``: Inspect a value of a variant type.
::
:: or 'a 'b : 'S -> 'c : 'S
iff bt :: [ 'a : 'S -> 'c : 'S]
bf :: [ 'b : 'S -> 'c : 'S]
> IF_LEFT bt bf / (Left a) : S => bt / a : S
> IF_LEFT bt bf / (Right b) : S => bf / b : S
- ``IF_RIGHT bt bf``: Inspect a value of a variant type.
::
:: or 'a 'b : 'S -> 'c : 'S
iff bt :: [ 'b : 'S -> 'c : 'S]
bf :: [ 'a : 'S -> 'c : 'S]
> IF_RIGHT bt bf / (Right b) : S => bt / b : S
> IF_RIGHT bt bf / (Left a) : S => bf / a : S
Operations on lists
~~~~~~~~~~~~~~~~~~~
- ``CONS``: Prepend an element to a list.
::
:: 'a : list 'a : 'S -> list 'a : 'S
> CONS / a : { <l> } : S => { a ; <l> } : S
- ``NIL 'a``: The empty list.
::
:: 'S -> list 'a : 'S
> NIL / S => {} : S
- ``IF_CONS bt bf``: Inspect an optional value.
::
:: list 'a : 'S -> 'b : 'S
iff bt :: [ 'a : list 'a : 'S -> 'b : 'S]
bf :: [ 'S -> 'b : 'S]
> IF_CONS bt bf / { a ; <rest> } : S => bt / a : { <rest> } : S
> IF_CONS bt bf / {} : S => bf / S
- ``MAP body``: Apply the body expression to each element of the list.
The body sequence has access to the stack.
::
:: (list 'elt) : 'A -> (list 'b) : 'A
iff body :: [ 'elt : 'A -> 'b : 'A ]
> MAP body / { a ; <rest> } : S => { body a ; <rest'> } : S
where MAP body / { <rest> } : S => { <rest'> } : S
> MAP body / {} : S => {} : S
- ``SIZE``: Get the number of elements in the list.
::
:: list 'elt : 'S -> nat : 'S
> SIZE / { _ ; <rest> } : S => 1 + s : S
where SIZE / { <rest> } : S => s : S
> SIZE / {} : S => 0 : S
- ``ITER body``: Apply the body expression to each element of a list.
The body sequence has access to the stack.
::
:: (list 'elt) : 'A -> 'A
iff body :: [ 'elt : 'A -> 'A ]
> ITER body / { a ; <rest> } : S => body ; ITER body / a : { <rest> } : S
> ITER body / {} : S => S
VI - Domain specific data types
-------------------------------
- ``timestamp``: Dates in the real world.
- ``mutez``: A specific type for manipulating tokens.
- ``contract 'param``: A contract, with the type of its code.
- ``address``: An untyped contract address.
- ``operation``: An internal operation emitted by a contract.
- ``key``: A public cryptography key.
- ``key_hash``: The hash of a public cryptography key.
- ``signature``: A cryptographic signature.
VII - Domain specific operations
--------------------------------
Operations on timestamps
~~~~~~~~~~~~~~~~~~~~~~~~
Current Timestamps can be obtained by the ``NOW`` operation, or
retrieved from script parameters or globals.
- ``ADD`` Increment / decrement a timestamp of the given number of
seconds.
::
:: timestamp : int : 'S -> timestamp : 'S
:: int : timestamp : 'S -> timestamp : 'S
> ADD / seconds : nat (t) : S => (seconds + t) : S
> ADD / nat (t) : seconds : S => (t + seconds) : S
- ``SUB`` Subtract a number of seconds from a timestamp.
::
:: timestamp : int : 'S -> timestamp : 'S
> SUB / seconds : nat (t) : S => (seconds - t) : S
- ``SUB`` Subtract two timestamps.
::
:: timestamp : timestamp : 'S -> int : 'S
> SUB / seconds(t1) : seconds(t2) : S => (t1 - t2) : S
- ``COMPARE``: Timestamp comparison.
::
:: timestamp : timestamp : 'S -> int : 'S
> COMPARE / seconds(t1) : seconds(t2) : S => -1 : S
iff t1 < t2
> COMPARE / seconds(t1) : seconds(t2) : S => 0 : S
iff t1 = t2
> COMPARE / seconds(t1) : seconds(t2) : S => 1 : S
iff t1 > t2
Operations on Mutez
~~~~~~~~~~~~~~~~~
Mutez (micro-Tez) are internally represented by a 64 bit signed
integers. There are restrictions to prevent creating a negative amount
of mutez. Operations are limited to prevent overflow and mixing them
with other numerical types by mistake. They are also mandatory checked
for under/overflows.
- ``ADD``:
::
:: mutez : mutez : 'S -> mutez : 'S
> ADD / x : y : S => [FAILED] on overflow
> ADD / x : y : S => (x + y) : S
- ``SUB``:
::
:: mutez : mutez : 'S -> mutez : 'S
> SUB / x : y : S => [FAILED]
iff x < y
> SUB / x : y : S => (x - y) : S
- ``MUL``
::
:: mutez : nat : 'S -> mutez : 'S
:: nat : mutez : 'S -> mutez : 'S
> MUL / x : y : S => [FAILED] on overflow
> MUL / x : y : S => (x * y) : S
- ``EDIV``
::
:: mutez : nat : 'S -> option (pair mutez mutez) : 'S
:: mutez : mutez : 'S -> option (pair nat mutez) : 'S
> EDIV / x : 0 : S => None
> EDIV / x : y : S => Some (Pair (x / y) (x % y)) : S
iff y <> 0
- ``COMPARE``
::
:: mutez : mutez : 'S -> int : 'S
> COMPARE / x : y : S => -1 : S
iff x < y
> COMPARE / x : y : S => 0 : S
iff x = y
> COMPARE / x : y : S => 1 : S
iff x > y
Operations on contracts
~~~~~~~~~~~~~~~~~~~~~~~
- ``CREATE_CONTRACT``: Forge a contract creation operation.
::
:: key_hash : option key_hash : bool : bool : mutez : lambda (pair 'p 'g) (pair (list operation) 'g) : 'g : 'S
-> operation : address : 'S
As with non code-emitted originations the contract code takes as
argument the transferred amount plus an ad-hoc argument and returns an
ad-hoc value. The code also takes the global data and returns it to be
stored and retrieved on the next transaction. These data are initialized
by another parameter. The calling convention for the code is as follows:
``(Pair arg globals)) -> (Pair operations globals)``, as extrapolated from
the instruction type. The first parameters are the manager, optional
delegate, then spendable and delegatable flags and finally the initial
amount taken from the currently executed contract. The contract is
returned as a first class value (to be dropped, passed as parameter or stored).
The ``CONTRACT 'p`` instruction will fail until it is actually originated.
- ``CREATE_CONTRACT { storage 'g ; parameter 'p ; code ... }``:
Forge a new contract from a literal.
::
:: key_hash : option key_hash : bool : bool : mutez : 'g : 'S
-> operation : address : 'S
Originate a contract based on a literal. This is currently the only way
to include transfers inside of an originated contract. The first
parameters are the manager, optional delegate, then spendable and
delegatable flags and finally the initial amount taken from the
currently executed contract.
- ``CREATE_ACCOUNT``: Forge an account (a contract without code) creation operation.
::
:: key_hash : option key_hash : bool : mutez : 'S
-> operation : contract unit : 'S
Take as argument the manager, optional delegate, the delegatable flag
and finally the initial amount taken from the currently executed
contract.
- ``TRANSFER_TOKENS``: Forge a transaction.
::
:: 'p : mutez : contract 'p : 'S -> operation : S
The parameter must be consistent with the one expected by the
contract, unit for an account.
- ``SET_DELEGATE``: Forge a delegation.
::
:: option key_hash : 'S -> operation : S
- ``BALANCE``: Push the current amount of mutez of the current contract.
::
:: 'S -> mutez : 'S
- ``ADDRESS``: Push the untyped version of a contract.
::
:: contract _ : 'S -> address : 'S
- ``CONTRACT 'p``: Push the untyped version of a contract.
::
:: address : 'S -> contract 'p : 'S
> CONTRACT / addr : S => Some addr : S
iff addr exists and is a contract of parameter type 'p
> CONTRACT / addr : S => Some addr : S
iff 'p = unit and addr is an implicit contract
> CONTRACT / addr : S => None : S
otherwise
- ``SOURCE``: Push the contract that initiated the current
transaction, i.e. the contract that paid the fees and
storage cost, and whose manager signed the operation
that was sent on the blockchain. Note that since
``TRANSFER_TOKENS`` instructions can be chained,
``SOURCE`` and ``SENDER`` are not necessarily the same.
::
:: 'S -> address : 'S
- ``SENDER``: Push the contract that initiated the current
internal transaction. It may be the ``SOURCE``, but may
also not if the source sent an order to an intermediate
smart contract, which then called the current contract.
::
:: 'S -> address : 'S
- ``SELF``: Push the current contract.
::
:: 'S -> contract 'p : 'S
where contract 'p is the type of the current contract
- ``AMOUNT``: Push the amount of the current transaction.
::
:: 'S -> mutez : 'S
- ``IMPLICIT_ACCOUNT``: Return a default contract with the given
public/private key pair. Any funds deposited in this contract can
immediately be spent by the holder of the private key. This contract
cannot execute Michelson code and will always exist on the
blockchain.
::
:: key_hash : 'S -> contract unit : 'S
Special operations
~~~~~~~~~~~~~~~~~~
- ``STEPS_TO_QUOTA``: Push the remaining steps before the contract
execution must terminate.
::
:: 'S -> nat : 'S
- ``NOW``: Push the timestamp of the block whose validation triggered
this execution (does not change during the execution of the
contract).
::
:: 'S -> timestamp : 'S
Serialization
~~~~~~~~~~~~~
- ``PACK``: Serializes a piece of data to its optimized
binary representation.
::
:: 'a : 'S -> bytes : 'S
- ``UNPACK 'a``: Deserializes a piece of data, is valid.
::
:: bytes : 'S -> option 'a : 'S
Cryptographic primitives
~~~~~~~~~~~~~~~~~~~~~~~~
- ``HASH_KEY``: Compute the b58check of a public key.
::
:: key : 'S -> key_hash : 'S
- ``BLAKE2B``: Compute a cryptographic hash of the value contents using the
Blake2B cryptographic hash function.
::
:: 'a : 'S -> string : 'S
- ``CHECK_SIGNATURE``: Check that a sequence of bytes has been signed
with a given key.
::
:: key : signature : string : 'S -> bool : 'S
- ``COMPARE``:
::
:: key_hash : key_hash : 'S -> int : 'S
> COMPARE / x : y : S => -1 : S
iff x < y
> COMPARE / x : y : S => 0 : S
iff x = y
> COMPARE / x : y : S => 1 : S
iff x > y
VIII - Macros
-------------
In addition to the operations above, several extensions have been added
to the language's concrete syntax. If you are interacting with the node
via RPC, bypassing the client, which expands away these macros, you will
need to desugar them yourself.
These macros are designed to be unambiguous and reversible, meaning that
errors are reported in terms of desugared syntax. Below you'll see
these macros defined in terms of other syntactic forms. That is how
these macros are seen by the node.
Compare
~~~~~~~
Syntactic sugar exists for merging ``COMPARE`` and comparison
combinators, and also for branching.
- ``CMP{EQ|NEQ|LT|GT|LE|GE}``
::
> CMP(\op) / S => COMPARE ; (\op) / S
- ``IF{EQ|NEQ|LT|GT|LE|GE} bt bf``
::
> IF(\op) bt bf / S => (\op) ; IF bt bf / S
- ``IFCMP{EQ|NEQ|LT|GT|LE|GE} bt bf``
::
> IFCMP(\op) / S => COMPARE ; (\op) ; IF bt bf / S
Fail
~~~~
The ``FAIL`` macros is equivalent to ``UNIT; FAILWITH`` and is callable
in any context since it does not use its input stack.
- ``FAIL``
::
> FAIL / S => UNIT; FAILWITH / S
Assertion Macros
~~~~~~~~~~~~~~~~
All assertion operations are syntactic sugar for conditionals with a
``FAIL`` instruction in the appropriate branch. When possible, use them
to increase clarity about illegal states.
- ``ASSERT``:
::
> ASSERT => IF {} {FAIL}
- ``ASSERT_{EQ|NEQ|LT|LE|GT|GE}``:
::
> ASSERT_(\op) => IF(\op) {} {FAIL}
- ``ASSERT_CMP{EQ|NEQ|LT|LE|GT|GE}``:
::
> ASSERT_CMP(\op) => IFCMP(\op) {} {FAIL}
- ``ASSERT_NONE``
::
> ASSERT_NONE => IF_NONE {} {FAIL}
- ``ASSERT_SOME``
::
> ASSERT_SOME => IF_SOME {FAIL} {}
- ``ASSERT_LEFT``:
::
> ASSERT_LEFT => IF_LEFT {} {FAIL}
- ``ASSERT_RIGHT``:
::
> ASSERT_RIGHT => IF_LEFT {FAIL} {}
Syntactic Conveniences
~~~~~~~~~~~~~~~~~~~~~~
These are macros are simply more convenient syntax for various common
operations.
- ``DII+P code``: A syntactic sugar for working deeper in the stack.
::
> DII(\rest=I*)P code / S => DIP (DI(\rest)P code) / S
- ``DUU+P``: A syntactic sugar for duplicating the ``n``\ th element of
the stack.
::
> DUU(\rest=U*)P / S => DIP (DU(\rest)P) ; SWAP / S
- ``P(\left=A|P(\left)(\right))(\right=I|P(\left)(\right))R``: A syntactic sugar
for building nested pairs.
::
> PA(\right)R / S => DIP ((\right)R) ; PAIR / S
> P(\left)IR / S => PAIR ; (\left)R / S
> P(\left)(\right)R => (\right)R ; (\left)R ; PAIR / S
A good way to quickly figure which macro to use is to mentally parse the
macro as ``P`` for pair constructor, ``A`` for left leaf and ``I`` for
right leaf. The macro takes as many elements on the stack as there are
leaves and constructs a nested pair with the shape given by its name.
Take the macro ``PAPPAIIR`` for instance:
::
P A P P A I I R
( l, ( ( l, r ), r ))
A typing rule can be inferred:
::
PAPPAIIR
:: 'a : 'b : 'c : 'd : 'S -> (pair 'a (pair (pair 'b 'c) 'd))
- ``UNP(\left=A|P(\left)(\right))(\right=I|P(\left)(\right))R``: A syntactic sugar
for destructing nested pairs. These macros follow the same convention
as the previous one.
::
> UNPAIR / S => DUP ; CAR ; DIP { CDR } / S
> UNPA(\right)R / S => UNPAIR ; DIP (UN(\right)R) / S
> UNP(\left)IR / S => UNPAIR ; UN(\left)R / S
> UNP(\left)(\right)R => UNPAIR ; UN(\left)R ; UN(\right)R / S
- ``C[AD]+R``: A syntactic sugar for accessing fields in nested pairs.
::
> CA(\rest=[AD]+)R / S => CAR ; C(\rest)R / S
> CD(\rest=[AD]+)R / S => CDR ; C(\rest)R / S
- ``IF_SOME bt bf``: Inspect an optional value.
::
:: option 'a : 'S -> 'b : 'S
iff bt :: [ 'a : 'S -> 'b : 'S]
bf :: [ 'S -> 'b : 'S]
> IF_SOME / (Some a) : S => bt / a : S
> IF_SOME / (None) : S => bf / S
- ``SET_CAR``: Set the first value of a pair.
::
> SET_CAR => CDR ; SWAP ; PAIR
- ``SET_CDR``: Set the first value of a pair.
::
> SET_CDR => CAR ; PAIR
- ``SET_C[AD]+R``: A syntactic sugar for setting fields in nested
pairs.
::
> SET_CA(\rest=[AD]+)R / S =>
{ DUP ; DIP { CAR ; SET_C(\rest)R } ; CDR ; SWAP ; PAIR } / S
> SET_CD(\rest=[AD]+)R / S =>
{ DUP ; DIP { CDR ; SET_C(\rest)R } ; CAR ; PAIR } / S
- ``MAP_CAR`` code: Transform the first value of a pair.
::
> MAP_CAR code => DUP ; CDR ; DIP { CAR ; code } ; SWAP ; PAIR
- ``MAP_CDR`` code: Transform the first value of a pair.
::
> MAP_CDR code => DUP ; CDR ; code ; SWAP ; CAR ; PAIR
- ``MAP_C[AD]+R`` code: A syntactic sugar for transforming fields in
nested pairs.
::
> MAP_CA(\rest=[AD]+)R code / S =>
{ DUP ; DIP { CAR ; MAP_C(\rest)R code } ; CDR ; SWAP ; PAIR } / S
> MAP_CD(\rest=[AD]+)R code / S =>
{ DUP ; DIP { CDR ; MAP_C(\rest)R code } ; CAR ; PAIR } / S
IX - Concrete syntax
--------------------
The concrete language is very close to the formal notation of the
specification. Its structure is extremely simple: an expression in the
language can only be one of the four following constructs.
1. An integer.
2. A character string.
3. The application of a primitive to a sequence of expressions.
4. A sequence of expressions.
This simple four cases notation is called Micheline.
The encoding of a Micheline source file must be UTF-8, and non-ASCII
characters can only appear in comments and strings.
Constants
~~~~~~~~~
There are three kinds of constants:
1. Integers or naturals in decimal notation.
2. Strings, with usual escape sequences: ``\n``, ``\t``, ``\b``,
``\r``, ``\\``, ``\"``. Unescaped line-breaks (both ``\n`` and ``\r``)
cannot appear in the middle of a string.
3. Byte sequences in hexadecimal notation, prefixed with ``0x``.
The current version of Michelson restricts strings to be the printable
subset of 7-bit ASCII, plus the escaped characters mentioned above.
Primitive applications
~~~~~~~~~~~~~~~~~~~~~~
A primitive application is a name followed by arguments
::
prim arg1 arg2
When a primitive application is the argument to another primitive
application, it must be wrapped with parentheses.
::
prim (prim1 arg11 arg12) (prim2 arg21 arg22)
Sequences
~~~~~~~~~
Successive expression can be grouped as a single sequence expression
using curly braces as delimiters and semicolon as separators.
::
{ expr1 ; expr2 ; expr3 ; expr4 }
A sequence can be passed as argument to a primitive.
::
prim arg1 arg2 { arg3_expr1 ; arg3_expr2 }
Primitive applications right inside a sequence cannot be wrapped.
::
{ (prim arg1 arg2) } # is not ok
Indentation
~~~~~~~~~~~
To remove ambiguities for human readers, the parser enforces some
indentation rules.
- For sequences:
- All expressions in a sequence must be aligned on the same column.
- An exception is made when consecutive expressions fit on the same
line, as long as the first of them is correctly aligned.
- All expressions in a sequence must be indented to the right of the
opening curly brace by at least one column.
- The closing curly brace cannot be on the left of the opening one.
- For primitive applications:
- All arguments in an application must be aligned on the same
column.
- An exception is made when consecutive arguments fit on the same
line, as long as the first of them is correctly aligned.
- All arguments in a sequence must be indented to the right of the
primitive name by at least one column.
Differences with the formal notation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The concrete syntax follows the same lexical conventions as the
specification: instructions are represented by uppercase identifiers,
type constructors by lowercase identifiers, and constant constructors
are Capitalized.
All domain specific constants are Micheline constants with specific
formats. Some have two variants accepted by the data type checker: a
readable one in a string and an optimized.
- ``mutez`` amounts are written as naturals.
- ``timestamp``\ s are written either using ``RFC 339`` notation
in a string (readable), or as the number of seconds since Epoch
in a natural (optimized).
- ``contract``\ s, ``address``\ es, ``key``\ s and ``signature``\ s
are written as strings, in their usual Base58 encoded versions
(readable), or as their raw bytes (optimized).
The optimized versions should not reach the RPCs, the protocol code
will convert to optimized by itself when forging operations, storing
to the database, and before hashing to get a canonical representation
of a datum for a given type.
To prevent errors, control flow primitives that take instructions as
parameters require sequences in the concrete syntax.
::
IF { instr1_true ; instr2_true ; ... }
{ instr1_false ; instr2_false ; ... }
Main program structure
~~~~~~~~~~~~~~~~~~~~~~
The toplevel of a smart contract file must be an un-delimited sequence
of four primitive applications (in no particular order) that provide its
``code``, ``parameter`` and ``storage`` fields.
See the next section for a concrete example.
Comments
~~~~~~~~
A hash sign (``#``) anywhere outside of a string literal will make the
rest of the line (and itself) completely ignored, as in the following
example.
::
{ PUSH nat 1 ; # pushes 1
PUSH nat 2 ; # pushes 2
ADD } # computes 2 + 1
Comments that span on multiple lines or that stop before the end of the
line can also be written, using C-like delimiters (``/* ... */``).
X - Annotations
---------------
The annotation mechanism of Michelson provides ways to better track data
on the stack and to give additional type constraints. Annotaions are
only here to add constraints, *i.e.* they cannot turn an otherwise
rejected program into an accepted one.
Stack visualization tools like the Michelson's Emacs mode print
annotations associated with each type in the program, as propagated by
the typechecker as well as variable annotations on the types of elements
in the stack. This is useful as a debugging aid.
We distinguish three kinds of annotations:
- type annotations, written ``:type_annot``,
- variable annotations, written ``@var_annot``,
- and field or constructors annotations, written ``%field_annot``.
Type Annotations
~~~~~~~~~~~~~~~~
Each type can be annotated with at most one type annotation. They are
used to give names to types. For types to be equal, their unnamed
version must be equal and their names must be the same or at least one
type must be unnamed.
For instance, the following Michelson program which put its integer
parameter in the storage is not well typed:
::
parameter (int :p) ;
storage (int :s) ;
code { UNPAIR ; SWAP ; DROP ; NIL operation ; PAIR }
Whereas this one is:
::
parameter (int :p) ;
storage int ;
code { UNPAIR ; SWAP ; DROP ; NIL operation ; PAIR }
Inner components of composed typed can also be named.
::
(pair :point (int :x_pos) (int :y_pos))
Push-like instructions, that act as constructors, can also be given a
type annotation. The stack type will then have a correspondingly named
type on top.
::
UNIT :t
:: 'A -> (unit :t) : 'A
PAIR :t
:: 'a : 'b : 'S -> (pair :t 'a 'b) : 'S
SOME t:
:: 'a : 'S -> (option :t 'a) : 'S
NONE :t 'a
:: 'S -> (option :t 'a) : 'S
LEFT :t 'b
:: 'a : 'S -> (or :t 'a 'b) : 'S
RIGHT :t 'a
:: 'b : 'S -> (or :t 'a 'b) : 'S
NIL :t 'a
:: 'S -> (list :t 'a) : 'S
EMPTY_SET :t 'elt
:: 'S -> (set :t 'elt) : 'S
EMPTY_MAP :t 'key 'val
:: 'S -> (map :t 'key 'val) : 'S
A no-op instruction ``CAST`` ensures the top of the stack has the
specified type, and change its type if it is compatible. In particular,
this allows to change or remove type names explicitly.
::
CAST 'b
:: 'a : 'S -> 'b : 'S
iff 'a = 'b
> CAST t / a : S => a : S
Variable Annotations
~~~~~~~~~~~~~~~~~~~~
Variable annotations can only be used on instructions that produce
elements on the stack. An instruction that produces ``n`` elements on
the stack can be given at most ``n`` variable annotations.
The stack type contains both the types of each element in the stack, as
well as an optional variable annotation for each element. In this
sub-section we note:
- ``[]`` for the empty stack ;
- ``@annot (top) : (rest)`` for the stack whose first value has type
``(top)`` and is annotated with variable annotation ``@annot`` and
whose queue has stack type ``(rest)``.
The instructions which do not accept any variable annotations are:
::
DROP
SWAP
IF_NONE
IF_LEFT
IF_CONS
ITER
IF
LOOP
LOOP_LEFT
DIP
FAILWITH
The instructions which accept at most one variable annotation are:
::
DUP
PUSH
UNIT
SOME
NONE
PAIR
CAR
CDR
LEFT
RIGHT
NIL
CONS
SIZE
MAP
MEM
EMPTY_SET
EMPTY_MAP
UPDATE
GET
LAMBDA
EXEC
ADD
SUB
CONCAT
MUL
OR
AND
XOR
NOT
ABS
IS_NAT
INT
NEG
EDIV
LSL
LSR
COMPARE
EQ
NEQ
LT
GT
LE
GE
ADDRESS
CONTRACT
SET_DELEGATE
IMPLICIT_ACCOUNT
NOW
AMOUNT
BALANCE
HASH_KEY
CHECK_SIGNATURE
BLAKE2B
STEPS_TO_QUOTA
SOURCE
SENDER
SELF
CAST
RENAME
The instructions which accept at most two variable annotations are:
::
CREATE_ACCOUNT
CREATE_CONTRACT
Annotations on instructions that produce multiple elements on the stack
will be used in order, where the first variable annotation is given to
the top-most element on the resulting stack. Instructions that produce
``n`` elements on the stack but are given less than ``n`` variable
annotations will see only their top-most stack type elements annotated.
::
CREATE_ACCOUNT @op @addr
:: key_hash : option key_hash : bool : tez : 'S
-> @op operation : @addr address : 'S
CREATE_ACCOUNT @op
:: key_hash : option key_hash : bool : tez : 'S
-> @op operation : address : 'S
A no-op instruction ``RENAME`` allows to rename variables in the stack
or to erase variable annotations in the stack.
::
RENAME @new
:: @old 'a ; 'S -> @new 'a : 'S
RENAME
:: @old 'a ; 'S -> 'a : 'S
Field and Constructor Annotations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Components of pair types, option types and or types can be annotated
with a field or constructor annotation. This feature is useful to encode
records fields and constructors of sum types.
::
(pair :point
(int %x)
(int %y))
The previous Michelson type can be used as visual aid to represent the
record type (given in OCaml-like syntax):
::
type point = { x : int ; y : int }
Similarly,
::
(or :t
(int %A)
(or
(bool %B)
(pair %C
(nat %n1)
(nat %n2))))
can be used to represent the algebraic data type (in OCaml-like syntax):
::
type t =
| A of int
| B of bool
| C of { n1 : nat ; n2 : nat }
Field annotations are part of the type (at the same level as type name
annotations), and so types with differing field names (if present) are
not considered equal.
Instructions that construct elements of composed types can also be
annotated with one or multiple field annotations (in addition to type
and variable annotations).
::
PAIR %fst %snd
:: 'a : 'b : 'S -> (pair ('a %fst) ('b %fst)) : 'S
LEFT %left %right 'b
:: 'a : 'S -> (or ('a %left) ('b %right)) : 'S
RIGHT %left %right 'a
:: 'b : 'S -> (or ('a %left) ('b %right)) : 'S
NONE %some 'a
:: 'S -> (option ('a %some))
Some %some
:: 'a : 'S -> (option ('a %some))
To improve readability and robustness, instructions ``CAR`` and ``CDR``
accept one field annotation. For the contract to type check, the name of
the accessed field in the destructed pair must match the one given here.
::
CAR %fst
:: (pair ('a %fst) 'b) : S -> 'a : 'S
CDR %snd
:: (pair 'a ('b %snd)) : S -> 'b : 'S
Syntax
~~~~~~
Primitive applications can receive one or many annotations.
An annotation is a sequence of characters that matches the regular
expression ``[@:%](|@|%|%%|[_a-ZA-Z][_0-9a-zA-Z\.]*)``. They come after
the primitive name and before its potential arguments.
::
(prim @v :t %x arg1 arg2 ...)
Ordering between different kinds of annotations is not significant, but
ordering among annotations of the same kind is. Annotations of a same
kind must be grouped together.
For instance these two annotated instructions are equivalent:
::
PAIR :t @my_pair %x %y
PAIR %x %y :t @my_pair
An annotation can be empty, in this case is will mean *no annotation*
and can be used as a wildcard. For instance, it is useful to annotate
only the right field of a pair instruction ``PAIR % %right`` or to
ignore field access constraints, *e.g.* in the macro ``UNPPAIPAIR %x1 %
%x3 %x4``.
Annotations and Macros
~~~~~~~~~~~~~~~~~~~~~~
Macros also support annotations, which are propagated on their expanded
forms. As with instructions, macros that produce ``n`` values on the
stack accept ``n`` variable annotations.
::
DUU+P @annot
> DUU(\rest=U*)P @annot / S => DIP (DU(\rest)P @annot) ; SWAP / S
C[AD]+R @annot %field_name
> CA(\rest=[AD]+)R @annot %field_name / S => CAR ; C(\rest)R @annot %field_name / S
> CD(\rest=[AD]+)R @annot %field_name / S => CDR ; C(\rest)R @annot %field_name / S
``CMP{EQ|NEQ|LT|GT|LE|GE}`` @annot
> CMP(\op) @annot / S => COMPARE ; (\op) @annot / S
The variable annotation on ``SET_C[AD]+R`` and ``MAP_C[AD]+R`` annotates
the resulting toplevel pair while its field annotation is used to check
that the modified field is the expected one.
::
SET_C[AD]+R @var %field
> SET_CAR @var %field => CDR %field ; SWAP ; PAIR @var
> SET_CDR @var %field => CAR %field ; PAIR @var
> SET_CA(\rest=[AD]+)R @var %field / S =>
{ DUP ; DIP { CAR ; SET_C(\rest)R %field } ; CDR ; SWAP ; PAIR @var } / S
> SET_CD(\rest=[AD]+)R @var %field/ S =>
{ DUP ; DIP { CDR ; SET_C(\rest)R %field } ; CAR ; PAIR @var } / S
MAP_C[AD]+R @var %field code
> MAP_CAR code => DUP ; CDR ; DIP { CAR %field ; code } ; SWAP ; PAIR @var
> MAP_CDR code => DUP ; CDR %field ; code ; SWAP ; CAR ; PAIR @var
> MAP_CA(\rest=[AD]+)R @var %field code / S =>
{ DUP ; DIP { CAR ; MAP_C(\rest)R %field code } ; CDR ; SWAP ; PAIR @var} / S
> MAP_CD(\rest=[AD]+)R @var %field code / S =>
{ DUP ; DIP { CDR ; MAP_C(\rest)R %field code } ; CAR ; PAIR @var} / S
Macros for nested ``PAIR`` and ``UNPAIR`` accept multiple
annotations. Field annotations for ``PAIR`` give names to leaves of the
constructed nested pair, in order. Variable annotations for ``UNPAIR``
give names to deconstructed components on the stack. This next snippet
gives examples instead of generic rewrite rules for readability
purposes.
::
PAPPAIIR @p %x1 %x2 %x3 %x4
:: 'a : 'b : 'c : 'd : 'S
-> @p (pair ('a %x1) (pair (pair ('b %x) ('c %x3)) ('d %x4))) : 'S
PAPAIR @p %x1 %x2 %x3
:: 'a : 'b : 'c : 'S -> @p (pair ('a %x1) (pair ('b %x) ('c %x3))) : 'S
UNPAIR @x @y
:: (pair 'a 'b) : 'S -> @x 'a : @y 'b : 'S
UNPAPPAIIR @x1 @x2 @x3 @x4
:: (pair 'a (pair (pair 'b 'c) 'd )) : 'S
-> @x1 'a : @x2 'b : @x3 'c : @x4 'd : 'S
Automatic Variable and Field Annotations Inferring
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
When no annotation is provided by the Michelson programmer, the
typechecker infers some annotations in specific cases. This greatly
helps users track information in the stack for bare contracts.
For unannotated accesses with ``CAR`` and ``CDR`` to fields that are
named will be appended (with an additional ``.`` character) to the pair
variable annotation.
::
CDAR
:: @p (pair ('a %foo) (pair %bar ('b %x) ('c %y))) : 'S -> @p.bar.x 'b : 'S
If fields are not named but the pair is still named in the stack then
``.car`` or ``.cdr`` will be appended.
::
CDAR
:: @p (pair 'a (pair 'b 'c)) : 'S -> @p.cdr.car 'b : 'S
If the original pair is not named in the stack, but a field annotation
is present in the pair type the accessed value will be annotated with a
variable annotation corresponding to the field annotation alone.
::
CDAR
:: (pair ('a %foo) (pair %bar ('b %x) ('c %y))) : 'S -> @p.bar.x 'b : 'S
A similar mechanism is used for context dependent instructions:
::
ADDRESS :: @c contract _ : 'S -> @c.address address : 'S
CONTRACT 'p :: @a address : 'S -> @a.contract contract 'p : 'S
BALANCE :: 'S -> @balance tez : 'S
SOURCE :: 'S -> @source address : 'S
SENDER :: 'S -> @sender address : 'S
SELF :: 'S -> @self contract 'p : 'S
AMOUNT :: 'S -> @amount tez : 'S
STEPS_TO_QUOTA :: 'S -> @steps nat : 'S
NOW :: 'S -> @now timestamp : 'S
Inside nested code blocks, bound items on the stack will be given a
default variable name annotation depending on the instruction and stack
type (which can be changed). For instance the annotated typing rule for
``ITER`` on lists is:
::
ITER body
:: @l (list 'e) : 'A -> 'A
iff body :: [ @l.elt e' : 'A -> 'A ]
Special Annotations
~~~~~~~~~~~~~~~~~~~
The special variable annotations ``@%%`` can be used on instructions
``CAR`` and ``CDR``. It means to use the accessed field name (if any) as
a name for the value on the stack. The following typing rule
demonstrates their use for instruction ``CAR``.
::
CAR @%
:: @p (pair ('a %fst) ('b %snd)) : 'S -> @fst 'a : 'S
CAR @%%
:: @p (pair ('a %fst) ('b %snd)) : 'S -> @p.fst 'a : 'S
The special variable annotation ``%@`` can be used on instructions
``PAIR``, ``SOME``, ``LEFT``, ``RIGHT``. It means to use the variable
name annotation in the stack as a field name for the constructed
element. Two examples with ``PAIR`` follows, notice the special
treatment of annotations with `.`.
::
PAIR %@ %@
:: @x 'a : @y 'b : 'S -> (pair ('a %x) ('b %y)) : 'S
PAIR %@ %@
:: @p.x 'a : @p.y 'b : 'S -> @p (pair ('a %x) ('b %y)) : 'S
:: @p.x 'a : @q.y 'b : 'S -> (pair ('a %x) ('b %y)) : 'S
XI - JSON syntax
---------------
Micheline expressions are encoded in JSON like this:
- An integer ``N`` is an object with a single field ``"int"`` whose
value is the decimal representation as a string.
``{ "int": "N" }``
- A string ``"contents"`` is an object with a single field ``"string"``
whose value is the decimal representation as a string.
``{ "string": "contents" }``
- A sequence is a JSON array.
``[ expr, ... ]``
- A primitive application is an object with two fields ``"prim"`` for
the primitive name and ``"args"`` for the arguments (that must
contain an array). A third optional field ``"annots"`` contains a
list of annotations, including their leading ``@``, ``%`` or ``%``
sign.
``{ "prim": "pair", "args": [ { "prim": "nat", "args": [] }, { "prim":
"nat", "args": [] } ], "annots": [":t"] }``
As in the concrete syntax, all domain specific constants are encoded as
strings.
XII - Examples
-------------
Contracts in the system are stored as a piece of code and a global data
storage. The type of the global data of the storage is fixed for each
contract at origination time. This is ensured statically by checking on
origination that the code preserves the type of the global data. For
this, the code of the contract is checked to be of type
``lambda (pair 'arg 'global) -> (pair (list operation) 'global)`` where
``'global`` is the type of the original global store given on origination.
The contract also takes a parameter and returns a list of internal operations,
hence the complete calling convention above. The internal operations are
queued for execution when the contract returns.
Empty contract
~~~~~~~~~~~~~~
The simplest contract is the contract for which the ``parameter`` and
``storage`` are all of type ``unit``. This contract is as follows:
::
code { CDR ; # keep the storage
NIL operation ; # return no internal operation
PAIR }; # respect the calling convention
storage unit;
parameter unit;
Reservoir contract
~~~~~~~~~~~~~~~~~~
We want to create a contract that stores tez until a timestamp ``T`` or
a maximum amount ``N`` is reached. Whenever ``N`` is reached before
``T``, all tokens are reversed to an account ``B`` (and the contract is
automatically deleted). Any call to the contract's code performed after
``T`` will otherwise transfer the tokens to another account ``A``.
We want to build this contract in a reusable manner, so we do not
hard-code the parameters. Instead, we assume that the global data of the
contract are ``(Pair (Pair T N) (Pair A B))``.
Hence, the global data of the contract has the following type
::
'g =
pair
(pair timestamp tez)
(pair (contract unit) (contract unit))
Following the contract calling convention, the code is a lambda of type
::
lambda
(pair unit 'g)
(pair (list operation) 'g)
written as
::
lambda
(pair
unit
(pair
(pair timestamp tez)
(pair (contract unit) (contract unit))))
(pair
(list operation)
(pair
(pair timestamp tez)
(pair (contract unit) (contract unit))))
The complete source ``reservoir.tz`` is:
::
parameter unit ;
storage
(pair
(pair (timestamp %T) (tez %N)) # T N
(pair (contract %A unit) (contract %B unit))) ; # A B
code
{ CDR ; DUP ; CAAR %T; # T
NOW ; COMPARE ; LE ;
IF { DUP ; CADR %N; # N
BALANCE ;
COMPARE ; LE ;
IF { NIL operation ; PAIR }
{ DUP ; CDDR %B; # B
BALANCE ; UNIT ;
TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS ;
PAIR } }
{ DUP ; CDAR %A; # A
BALANCE ;
UNIT ;
TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS ;
PAIR } }
Reservoir contract (variant with broker and status)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
We basically want the same contract as the previous one, but instead of
leaving it empty, we want to keep it alive, storing a flag ``S`` so that we
can tell afterwards if the tokens have been transferred to ``A`` or
``B``. We also want a broker ``X`` to get some fee ``P`` in any case.
We thus add variables ``P`` and ``S`` and ``X`` to the global data of
the contract, now
``(Pair (S, Pair (T, Pair (Pair P N) (Pair X (Pair A B)))))``. ``P`` is
the fee for broker ``A``, ``S`` is the state, as a string ``"open"``,
``"timeout"`` or ``"success"``.
At the beginning of the transaction:
::
S is accessible via a CDAR
T via a CDDAR
P via a CDDDAAR
N via a CDDDADR
X via a CDDDDAR
A via a CDDDDDAR
B via a CDDDDDDR
The complete source ``scrutable_reservoir.tz`` is:
::
parameter unit ;
storage
(pair
string # S
(pair
timestamp # T
(pair
(pair mutez mutez) # P N
(pair
(contract unit) # X
(pair (contract unit) (contract unit)))))) ; # A B
code
{ DUP ; CDAR ; # S
PUSH string "open" ;
COMPARE ; NEQ ;
IF { FAIL } # on "success", "timeout" or a bad init value
{ DUP ; CDDAR ; # T
NOW ;
COMPARE ; LT ;
IF { # Before timeout
# We compute (P + N) mutez
PUSH mutez 0 ;
DIP { DUP ; CDDDAAR } ; ADD ; # P
DIP { DUP ; CDDDADR } ; ADD ; # N
# We compare to the cumulated amount
BALANCE ;
COMPARE; LT ;
IF { # Not enough cash, we just accept the transaction
# and leave the global untouched
CDR ; NIL operation ; PAIR }
{ # Enough cash, successful ending
# We update the global
CDDR ; PUSH string "success" ; PAIR ;
# We transfer the fee to the broker
DUP ; CDDAAR ; # P
DIP { DUP ; CDDDAR } ; # X
UNIT ; TRANSFER_TOKENS ;
# We transfer the rest to A
DIP { DUP ; CDDADR ; # N
DIP { DUP ; CDDDDAR } ; # A
UNIT ; TRANSFER_TOKENS } ;
NIL operation ; SWAP ; CONS ; SWAP ; CONS ;
PAIR } }
{ # After timeout, we refund
# We update the global
CDDR ; PUSH string "timeout" ; PAIR ;
# We try to transfer the fee to the broker
BALANCE ; # available
DIP { DUP ; CDDAAR } ; # P
COMPARE ; LT ; # available < P
IF { BALANCE ; # available
DIP { DUP ; CDDDAR } ; # X
UNIT ; TRANSFER_TOKENS }
{ DUP ; CDDAAR ; # P
DIP { DUP ; CDDDAR } ; # X
UNIT ; TRANSFER_TOKENS } ;
# We transfer the rest to B
DIP { BALANCE ; # available
DIP { DUP ; CDDDDDR } ; # B
UNIT ; TRANSFER_TOKENS } ;
NIL operation ; SWAP ; CONS ; SWAP ; CONS ;
PAIR } } }
Forward contract
~~~~~~~~~~~~~~~~
We want to write a forward contract on dried peas. The contract takes as
global data the tons of peas ``Q``, the expected delivery date ``T``,
the contract agreement date ``Z``, a strike ``K``, a collateral ``C``
per ton of dried peas, and the accounts of the buyer ``B``, the seller
``S`` and the warehouse ``W``.
These parameters as grouped in the global storage as follows:
::
Pair
(Pair (Pair Q (Pair T Z)))
(Pair
(Pair K C)
(Pair (Pair B S) W))
of type
::
pair
(pair nat (pair timestamp timestamp))
(pair
(pair tez tez)
(pair (pair account account) account))
The 24 hours after timestamp ``Z`` are for the buyer and seller to store
their collateral ``(Q * C)``. For this, the contract takes a string as
parameter, matching ``"buyer"`` or ``"seller"`` indicating the party for
which the tokens are transferred. At the end of this day, each of them
can send a transaction to send its tokens back. For this, we need to
store who already paid and how much, as a ``(pair tez tez)`` where the
left component is the buyer and the right one the seller.
After the first day, nothing cam happen until ``T``.
During the 24 hours after ``T``, the buyer must pay ``(Q * K)`` to the
contract, minus the amount already sent.
After this day, if the buyer didn't pay enough then any transaction will
send all the tokens to the seller.
Otherwise, the seller must deliver at least ``Q`` tons of dried peas to
the warehouse, in the next 24 hours. When the amount is equal to or
exceeds ``Q``, all the tokens are transferred to the seller.
For storing the quantity of peas already
delivered, we add a counter of type ``nat`` in the global storage. For
knowing this quantity, we accept messages from W with a partial amount
of delivered peas as argument.
After this day, any transaction will send all the tokens to the buyer
(not enough peas have been delivered in time).
Hence, the global storage is a pair, with the counters on the left, and
the constant parameters on the right, initially as follows.
::
Pair
(Pair 0 (Pair 0_00 0_00))
(Pair
(Pair (Pair Q (Pair T Z)))
(Pair
(Pair K C)
(Pair (Pair B S) W)))
of type
::
pair
(pair nat (pair tez tez))
(pair
(pair nat (pair timestamp timestamp))
(pair
(pair tez tez)
(pair (pair account account) account)))
The parameter of the transaction will be either a transfer from the
buyer or the seller or a delivery notification from the warehouse of
type ``(or string nat)``.
At the beginning of the transaction:
::
Q is accessible via a CDDAAR
T via a CDDADAR
Z via a CDDADDR
K via a CDDDAAR
C via a CDDDADR
B via a CDDDDAAR
S via a CDDDDADR
W via a CDDDDDR
the delivery counter via a CDAAR
the amount versed by the seller via a CDADDR
the argument via a CAR
The complete source ``forward.tz`` is:
::
parameter
(or string nat) ;
storage
(pair
(pair nat (pair tez tez)) # counter from_buyer from_seller
(pair
(pair nat (pair timestamp timestamp)) # Q T Z
(pair
(pair tez tez) # K C
(pair
(pair (contract unit) (contract unit)) # B S
(contract unit))))) ; # W
code
{ DUP ; CDDADDR ; # Z
PUSH int 86400 ; SWAP ; ADD ; # one day in second
NOW ; COMPARE ; LT ;
IF { # Before Z + 24
DUP ; CAR ; # we must receive (Left "buyer") or (Left "seller")
IF_LEFT
{ DUP ; PUSH string "buyer" ; COMPARE ; EQ ;
IF { DROP ;
DUP ; CDADAR ; # amount already versed by the buyer
DIP { AMOUNT } ; ADD ; # transaction
# then we rebuild the globals
DIP { DUP ; CDADDR } ; PAIR ; # seller amount
PUSH nat 0 ; PAIR ; # delivery counter at 0
DIP { CDDR } ; PAIR ; # parameters
# and return Unit
NIL operation ; PAIR }
{ PUSH string "seller" ; COMPARE ; EQ ;
IF { DUP ; CDADDR ; # amount already versed by the seller
DIP { AMOUNT } ; ADD ; # transaction
# then we rebuild the globals
DIP { DUP ; CDADAR } ; SWAP ; PAIR ; # buyer amount
PUSH nat 0 ; PAIR ; # delivery counter at 0
DIP { CDDR } ; PAIR ; # parameters
# and return Unit
NIL operation ; PAIR }
{ FAIL } } } # (Left _)
{ FAIL } } # (Right _)
{ # After Z + 24
# if balance is emptied, just fail
BALANCE ; PUSH mutez 0 ; IFCMPEQ { FAIL } {} ;
# test if the required amount is reached
DUP ; CDDAAR ; # Q
DIP { DUP ; CDDDADR } ; MUL ; # C
PUSH nat 2 ; MUL ;
BALANCE ; COMPARE ; LT ; # balance < 2 * (Q * C)
IF { # refund the parties
CDR ; DUP ; CADAR ; # amount versed by the buyer
DIP { DUP ; CDDDAAR } ; # B
UNIT ; TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS ; SWAP ;
DUP ; CADDR ; # amount versed by the seller
DIP { DUP ; CDDDADR } ; # S
UNIT ; TRANSFER_TOKENS ; SWAP ;
DIP { CONS } ;
DUP ; CADAR ; DIP { DUP ; CADDR } ; ADD ;
BALANCE ; SUB ; # bonus to the warehouse
DIP { DUP ; CDDDDR } ; # W
UNIT ; TRANSFER_TOKENS ;
DIP { SWAP } ; CONS ;
# leave the storage as-is, as the balance is now 0
PAIR }
{ # otherwise continue
DUP ; CDDADAR ; # T
NOW ; COMPARE ; LT ;
IF { FAIL } # Between Z + 24 and T
{ # after T
DUP ; CDDADAR ; # T
PUSH int 86400 ; ADD ; # one day in second
NOW ; COMPARE ; LT ;
IF { # Between T and T + 24
# we only accept transactions from the buyer
DUP ; CAR ; # we must receive (Left "buyer")
IF_LEFT
{ PUSH string "buyer" ; COMPARE ; EQ ;
IF { DUP ; CDADAR ; # amount already versed by the buyer
DIP { AMOUNT } ; ADD ; # transaction
# The amount must not exceed Q * K
DUP ;
DIIP { DUP ; CDDAAR ; # Q
DIP { DUP ; CDDDAAR } ; MUL ; } ; # K
DIP { COMPARE ; GT ; # new amount > Q * K
IF { FAIL } { } } ; # abort or continue
# then we rebuild the globals
DIP { DUP ; CDADDR } ; PAIR ; # seller amount
PUSH nat 0 ; PAIR ; # delivery counter at 0
DIP { CDDR } ; PAIR ; # parameters
# and return Unit
NIL operation ; PAIR }
{ FAIL } } # (Left _)
{ FAIL } } # (Right _)
{ # After T + 24
# test if the required payment is reached
DUP ; CDDAAR ; # Q
DIP { DUP ; CDDDAAR } ; MUL ; # K
DIP { DUP ; CDADAR } ; # amount already versed by the buyer
COMPARE ; NEQ ;
IF { # not reached, pay the seller
BALANCE ;
DIP { DUP ; CDDDDADR } ; # S
DIIP { CDR } ;
UNIT ; TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS ; PAIR }
{ # otherwise continue
DUP ; CDDADAR ; # T
PUSH int 86400 ; ADD ;
PUSH int 86400 ; ADD ; # two days in second
NOW ; COMPARE ; LT ;
IF { # Between T + 24 and T + 48
# We accept only delivery notifications, from W
DUP ; CDDDDDR ; ADDRESS ; # W
SENDER ;
COMPARE ; NEQ ;
IF { FAIL } {} ; # fail if not the warehouse
DUP ; CAR ; # we must receive (Right amount)
IF_LEFT
{ FAIL } # (Left _)
{ # We increment the counter
DIP { DUP ; CDAAR } ; ADD ;
# And rebuild the globals in advance
DIP { DUP ; CDADR } ; PAIR ;
DIP { CDDR } ; PAIR ;
UNIT ; PAIR ;
# We test if enough have been delivered
DUP ; CDAAR ;
DIP { DUP ; CDDAAR } ;
COMPARE ; LT ; # counter < Q
IF { CDR ; NIL operation } # wait for more
{ # Transfer all the money to the seller
BALANCE ;
DIP { DUP ; CDDDDADR } ; # S
DIIP { CDR } ;
UNIT ; TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS } } ;
PAIR }
{ # after T + 48, transfer everything to the buyer
BALANCE ;
DIP { DUP ; CDDDDAAR } ; # B
DIIP { CDR } ;
UNIT ; TRANSFER_TOKENS ;
NIL operation ; SWAP ; CONS ;
PAIR} } } } } } }
XII - Full grammar
------------------
::
<data> ::=
| <int constant>
| <natural number constant>
| <string constant>
| <timestamp string constant>
| <signature string constant>
| <key string constant>
| <key_hash string constant>
| <tez string constant>
| <contract string constant>
| Unit
| True
| False
| Pair <data> <data>
| Left <data>
| Right <data>
| Some <data>
| None
| { <data> ; ... }
| { Elt <data> <data> ; ... }
| instruction
<instruction> ::=
| { <instruction> ... }
| DROP
| DUP
| SWAP
| PUSH <type> <data>
| SOME
| NONE <type>
| UNIT
| IF_NONE { <instruction> ... } { <instruction> ... }
| PAIR
| CAR
| CDR
| LEFT <type>
| RIGHT <type>
| IF_LEFT { <instruction> ... } { <instruction> ... }
| NIL <type>
| CONS
| IF_CONS { <instruction> ... } { <instruction> ... }
| EMPTY_SET <type>
| EMPTY_MAP <comparable type> <type>
| MAP { <instruction> ... }
| ITER { <instruction> ... }
| MEM
| GET
| UPDATE
| IF { <instruction> ... } { <instruction> ... }
| LOOP { <instruction> ... }
| LOOP_LEFT { <instruction> ... }
| LAMBDA <type> <type> { <instruction> ... }
| EXEC
| DIP { <instruction> ... }
| FAILWITH
| CAST
| RENAME
| CONCAT
| ADD
| SUB
| MUL
| DIV
| ABS
| NEG
| MOD
| LSL
| LSR
| OR
| AND
| XOR
| NOT
| COMPARE
| EQ
| NEQ
| LT
| GT
| LE
| GE
| INT
| SELF
| TRANSFER_TOKENS
| SET_DELEGATE
| CREATE_ACCOUNT
| CREATE_CONTRACT
| IMPLICIT_ACCOUNT
| NOW
| AMOUNT
| BALANCE
| CHECK_SIGNATURE
| BLAKE2B
| HASH_KEY
| STEPS_TO_QUOTA
| SOURCE
| SENDER
<type> ::=
| <comparable type>
| key
| unit
| signature
| option <type>
| list <type>
| set <comparable type>
| operation
| contract <type>
| pair <type> <type>
| or <type> <type>
| lambda <type> <type>
| map <comparable type> <type>
| big_map <comparable type> <type>
<comparable type> ::=
| int
| nat
| string
| tez
| bool
| key_hash
| timestamp
XIII - Reference implementation
-------------------------------
The language is implemented in OCaml as follows:
- The lower internal representation is written as a GADT whose type
parameters encode exactly the typing rules given in this
specification. In other words, if a program written in this
representation is accepted by OCaml's typechecker, it is guaranteed
type-safe. This of course also valid for programs not handwritten but
generated by OCaml code, so we are sure that any manipulated code is
type-safe.
In the end, what remains to be checked is the encoding of the typing
rules as OCaml types, which boils down to half a line of code for
each instruction. Everything else is left to the venerable and well
trusted OCaml.
- The interpreter is basically the direct transcription of the
rewriting rules presented above. It takes an instruction, a stack and
transforms it. OCaml's typechecker ensures that the transformation
respects the pre and post stack types declared by the GADT case for
each instruction.
The only things that remain to we reviewed are value dependent
choices, such as that we did not swap true and false when
interpreting the If instruction.
- The input, untyped internal representation is an OCaml ADT with the
only 5 grammar constructions: ``String``, ``Int``, ``Seq`` and
``Prim``. It is the target language for the parser, since not all
parsable programs are well typed, and thus could simply not be
constructed using the GADT.
- The typechecker is a simple function that recognizes the abstract
grammar described in section X by pattern matching, producing the
well-typed, corresponding GADT expressions. It is mostly a checker,
not a full inferrer, and thus takes some annotations (basically the
input and output of the program, of lambdas and of uninitialized maps
and sets). It works by performing a symbolic evaluation of the
program, transforming a symbolic stack. It only needs one pass over
the whole program.
Here again, OCaml does most of the checking, the structure of the
function is very simple, what we have to check is that we transform a
``Prim ("If", ...)`` into an ``If``, a ``Prim ("Dup", ...)`` into a
``Dup``, etc.
Reference in New Issue View Git Blame Copy Permalink